Torin BIG RED JACKS TY30028, Руководство пользователя

Страница: 7 / 67

7
5. Install the pressure gauge (12) to the top of frame
(6), with M20 thin nut (10). Hand tighten the
pressure gauge (12) with M20 nut (10) and make
sure dial gauge is is facing proper direction up.
Tight gauge securely.
6. Locate the hydraulic hose T-fitting on the hose
assembly (33). Install the O-ring (9) into the
groove of the hose connection T-fitting (33). Then
Connect the hydraulic hose to (33), to the gauge
(12). Securely tighten the hose T-fitting( 33)on the
gauge(12) .
8. Locate the male hydraulic hose coupling (33)
and attach to the cylinder(2) Tighten with wrench
securely.
7. Insert the cylinder assembly (2) from the topside
of frame. Once the cylinder is inserted intothe
cylinder base (8) make sure that the roundlifting
ring is seated flat on the cylinder base (8). Then
attach the round nut (R2) to the cylinderassembly.
Turn clockwise to screw the roundnut (R2) onto
threaded shaft on the ram. Tightenround nut (R2).
33
2
R2
2