MT05S GPS Motorcycle/Vehicle Tracker
User Manual
Page 8
1(default)
GPS on when ACC is on
2
Close GPRS connection, GPS module
After setting 111111PWR:2, if there is no vibration and ACC is turned OFF,
the tracker will go into power save mode after 5 minutes.
Once there is vibration or engine is turned ON, or incoming call/SMS, the
tracker will wake up from the power save mode immediately.
Other SMS Command List
Note: ****** is user’s password and the default password is 111111. The
tracker will only accept commands with the correct password.
Functions
SMS Command
Example
Auto Report by SMS
******RPT:X
111111RPT:5
Remarks: To set time interval for continuous automatic report via SMS.
X is the interval in minute. If X=0 to turn off tracking by time.
Example, the tracker will send location data back to 3rd alarm-received phone (XXX) every 5
minutes. 111111*10*20*30XXX*
Movement Alarm
******
MOV:X
111111
MOV:500
X: X is the radius of the fence. default setting is 500 meters
=0: close the movement alarm (when tracker is armed, it will be activated automatically.)
Example: it is set the radius of movement alarm as 500meters.
Set the Shock Sensor
******SHK:X
111111SHK:3
It is to set the sensitivity of the shock sensor.
X=1~5. (X=1, less sensitive; X=5, most
sensitive; default X=2).
Clear the Parameters
******CLR
111111CLR
Remarks: it will reset all the parameters to the default settings.
Reboot the Tracker
******STR
111111STR
It will reboot the tracker immediately.