MT05S GPS Motorcycle/Vehicle Tracker
User Manual
Page11
111111WWW:RPT:X;
This is to set the upload time interval. The unit is second, the minimum
value is 10 seconds. The default setting is 60
Example: 111111WWW:RPT:60;SLP:300
；
(Upload time interval: Engine ON:
60s, Engine OFF: 300seconds)
111111WWW:RUN:X;
X=0; is to close down the GPRS;
X=1; is to open the GPRS via TCP
E.g.: 111111WWW
：
RUN
：
1
；
(Open the TCP connection)
111111WWW:
You can send 111111WWW: to check the GPRS settings.
Default GPRS Setting
The initiated GPRS setting is:
IPN:
COM:8500
APN:(auto detection)
RPT: 20
SLP:120
RUN:1
IV . Specifications
Working voltage: +6.0 ~+60VDC
Power Consumption: Standby current:8mA
Working current: 20mA;
Deep sleep mode current: <4mA;
Inside Backup battery: Rechargeable 3.7V 180mAh Li-ion battery
Size of the main unit:
58*40*15
(mm)
Weight of the main unit: 34g
Working temperature: -20 ~ 85
℃
Humidity: 0 ~ 95%
GSM frequencies: Quad-band: 850MHz/900MHz/1800MHz/1900MHz
GPS chip: U-blox 7 chipset
Receiving ways
56 channels
Working frequencies
1575.42Mhz C/A
（
GPS
）
Receiving sensibility
-162dBm
Positioning accuracy
≤10m (wide-open area)
Speed accuracy
≤0.2M/S (wide-open area)
Positioning mode
Auto 2D/3D
Hot start
1 sec., average