Press the MODE button, the following functions can be achieved by the button ENTER:
SH01-03:: run the preset shows
；
SP01-10: running the preset shows speed adjustments
3.sound active
Press the MODE button, till SOUND appears, press UP or DOWN, SOUND ON,SOUND OFF,
display, confirm SOUND ON by the button ENTER, the item will run to the beat of music, the
sound active sensitivity can be adjusted from SENS 001 smallest to SENS 010 biggest
4. Synchronization & master /slave mode
Take one item and set the item at auto or sound active as above,then get other items and
press the button MODE, set at SLAVE, confirm by the button of ENTER, then connect the
items at SLAVE to the item at AUTO or sound active, disconnect the items from DMX
controller, the items will work simultaneously. The item at auto or sound active works as
master, others as slave.
LED DISPLAY CONTROL:
Main menu
Sub menu
1.A001
001-512
（
ADDRESS SETTING)
2.CH09
9/5/6CH
（
CHANNEL MODES)
3.SH01
ON/OFF
（
PRESET SHOWS
）
4.SP
01-10
（
PRESET SHOWS RUNNING SPEED
）
5.SnoF
ON/OFF
（
SOUND ACTIVE
）
6.Sn01
01-10
（
SOUND ACTIVE SENSITIVITY ADJUSTING
）
7.SLoF
ON/OFF
（
SLAVE
）
8.rdoF
ON/OFF
（
DISPLAYING REVERSEDLY
）
9.R255
000-255
（
DIMMER
）
10.G255
000-255
（
DIMMER
）
11.B255
000-255
（
DIMMER
）
12.W255
000-255
（
DIMMER
）
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and
rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1:
Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2:
Remove the old fuse from the fuse holder.
Step 3:
Install the new fuse in the fuse holder.
Step 4:
Replace the fuse holder in the housing.
TECHNICAL SPECIFICATIONS
