1. DMX 512 protocol
Addressing
The LED DISPLAY on the rear side of the base allows you to assign the DMX fixture address,
which is defined as the first channel from which the item will respond to the controller. If you
set, for example, the address to channel 7, the item will use the channel 7 to 14 for control.
Please, be sure that you don’t have any overlapping channels in order to control each item
correctly and independently from any other fixture on the DMX data link. If two, three or more
items are addressed similarly, they will work similarly. At DMX mode you can choose the
address from 1 to 512.After you connect the item to the mains, the item starts running. When
the item finishes resetting, A-OO1 will flash in the led display and then set the desired DMX
address by pressing the UP or DOWN buttons.
DMX Controlling:
After having addressed all items, you may now start operating these via your lighting controller.
After switching on, the item will automatically detect whether DMX 512 data is received or not.
DMX FUNCTIONS
9-CHANNEL MODE
Channel 1 – red from darkness to full brightness
Channel 2 – green from darkness to full brightness
Channel 3 –blue from darkness to full brightness
Channel 4 – white from darkness to full brightness
Channel 5 – master dimmer from darkness to full brightness
Channel 6 –strobe
Channel 7–color macros
Channel 8– color changing
Channel 9– color fades
5-CHANNEL MODE
Channel 1 – red from darkness to full brightness
Channel 2 – green from darkness to full brightness
Channel 3 –blue from darkness to full brightness
Channel 4 – white from darkness to full brightness
Channel 5 – master dimmer from darkness to full brightness
6-CHANNEL MODE
Channel 1 – red from darkness to full brightness
Channel 2 – green from darkness to full brightness
Channel 3 –blue from darkness to full brightness
Channel 4 – strobe
Channel 5 – white from darkness to full brightness
Channel 6 – master dimmer from darkness to full brightness
2.auto
