TOPP K500, Инструкция по установке и эксплуатации

Страница: 6 / 44

6
2.4
PACKING
Every standard product package (cardboard carton) contains:
N.1 package of hardware consisting of 2 self-tapping screws TC d6x70 and 2 nylon anchor bolts 10x60;
N.1 K500 automatic door (complete with motor units and belt transmission preassembled on the crossbar, side caps,
casing, door stop limit switch, cable raceway, emergency battery, raceway,rubber cable sleeves);
@ The number of some of the parts described above may vary depending on the type of configuration . If more parts are
necessary, contact the manufacturer.
N.2 warning labels for moving wings that have to be sticked on the centre of the moving wings (Fig.1);
N.2 Supporting brackets on the crossbar;
N.2 Carriage units with relative hardware for fastening to the adapter;
Make sure the parts described above are in the package and that the automation has not undergone any damage in
shipment. If you find anything unusual, do not install the automation and request the service department of the local retailer
or the manufacturer.
N.1 Adapter for framed door panels;
2.3
TECHNICAL DATA
Tab. 1 lists the technical data that characterize the K500 automation.
POWER SUPPLY
PROTECTION OF ELECTRIC DEVICES
WORKING TEMPERATURE
NUMBER OF DOOR PANELS
230V ~ 50Hz
24V 500mA max
0,80 A
180 W
Continuous
Adjustable 10 ÷ 80 cm/s
Adjustable 1 ÷ 5 cm/s
Adjustable 0 ÷ 60 s
IP X0
2 PANELS
K500 MODEL
Tab. 1
PERIPHERAL POWER OUTPUT
POWER ABSORBED
ABSORPTION
OPENING/CLOSING SPEED
OPENING/CLOSING APPROACH SPEED
AUTOMATIC CLOSING TIME
TYPE OF USE
MAINS VOLTAGE FUSE 230V
OPENING/CLOSING ACCELERATION
Adjustable 1 ÷ 12
5 x 20 - T 800 delayed
MAXIMUM CAPACITY
SIZE OF OPENING
250kg each panel
1600÷3200 mm
INSTRUCTIONS FOR INSTALLATION AND USE EN K500
-20°C
+50°C
Warning labels
for moving wings
Fig. 1