Non-use Periods:
Object and Liquid Entry:
Damage Requiring Service:
Servicing:
The user should not attempt to service the appliance beyond that is describedin the
Instructions.All other servicing should be referred to qualifield service personnel.
The power cord of the appliance should be unplugged from the outlet when left unused
for a long period of time.
Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
The appliance should be serviced by qualified service personnel when:
-The power supply cord or the plug has been damaged; or
-Objects have fallen,or liquid has been spilled into the appliance; or
-The appliance has been exposed to rain; or
-The appliance dose not appear to operate normally or exhibits a marked change in
performance; or
-The appliance has been dropped, or the enclosure damaged.
Operating
SPECIFICATIONS
XLR-F-JACK unbalanced link
1
2
3
LINK 3 to 1
GROUND
SIGNAL
SLEEVE
TIP
XLR-M-JACK unbalanced link
LINK 3 to 1
1
2
3
GROUND
SIGNAL
TIP
SLEEVE
10
10
Bandwidth 20 Hz to 20 kHz,
0/
0.5 dB
+5 Hz to -90 kHz,
0/
3 dB
Ref.:
4 dBu, 20 Hz to 20 kHz, unweighted
Stereo Mode:
93 dB
94 dB
95 dB
94 dB
90 dB
106 dB, unweighted
Frequency Response
Dynamic Range
High Output
High-Mid Output
Mid Output
Low-Mid Output
Low Output
Signal to Noise Ratio
93 dB
88 dB
Mono Mode:
PERFORMANCE
INPUT
XLR
Electronically servo-balanced, RF filtered
Balanced
50k Ohms, unbalanced
25k Ohms
22 dBu typical, balanced or unbalanced
40 dB, typically
55 dB at 1 kHz
OUTPUT
Connectors
Electronically servo-balanced, RF filtered
Balanced 60 Ohms, unbalanced 30 Ohms
+20 dBm balanced/unbalanced
Connectors
Type
Impedance
Impedance
Max. Output Level
Type
XLR
Max. Input level
CMRR
Limiter Off
0.04%
High to Low:
High to Mid:
Mid to Low:
Interchannel Crosstalk
THD & Noise
Limiter On
93 dB
94 dB
95 dB
0.5
