10, The temperature does not exceed 50
℃
. Temperature can be set, according to the length of pet hair set
different temperature for dry.
11. Two-speed wind speed setting makes drying process more comfortable.
2
、
Control panel
Product working principle
Pet hair dryer is equipped with electric heater, fan, temperature control and ultraviolet lamp.
The hot air is blown out by heating element and fan, and the air forms a thermal circulation to achieve the effect
of low-temperature drying. The set temperature and time can be adjusted by controller.
Product technical parameters
Product working principle and method
1
、
Operation steps
The pet hair dryer should placed on the flat ground,
plug in the power supply, and the switch indicator light on the control panel begins to blink. At this time, press the
"switch" button on the touch pad, and the machine starts to work. Directly press the "
▲
" or "
▼
" button to set the
temperature, and then press the "time" button. Press to increase the "
▲
" or reduce the "
▼
" button setting time, (set the
temperature according to the "temperature setting reference table" select the appropriate temperature). In winter or
when the temperature is low, it is recommended to preheat the pet for two minutes and then put it into the box when the
temperature reaches a comfortable state
2
、
Disinfection
The disinfection function can be enabled only after the pet leaves in the box. Do not enable the disinfection function
when the pet is in the box. Otherwise, the pet will be harmed. Press the "disinfection" button, if there is no operation, the
disinfection lamp will stop automatically one minute later.
3
、
Lighting
Press the "Lighting" button to turn on the light in the chassis, and then press the "Lighting" button to turn off the light.
Model
Rated voltage
Rated
frequency
Rated power
CM-A01
AC220V
50Hz
1500W
CM-B01
AC220V
50Hz
1300W
Display Screen
Increas
Time
Wind Speed
Decrease
Disinfection
Lighting
Switch
