Shenzhen TOPFLYTECH Co., Limited. All Rights Reserved 9
6.
Cautions of Tracker Wiring
6.1
Power Supply Cable (Refer to the diagram on page 5)
6.1.1
Standard working voltage of the tracker is 7V to 32V DC. Please use the original
cables. The red line is +, the black line is -.
6.1.2
Orange cable(ACC) connects to the ignition switch of vehicle. It will enable the
tracker to know the exact status of the vehicle.
6.1.3
The yellow cable connects to the cable with the same color of the relay. Fasten
the relay tightly at a dry place. It is recommended to cover the relay with a plastic
bag for protection.
6.2
Microphone Cable
Connect microphone for listen-in.
6.3
SOS Alarm Cable
Connect SOS button for calling for help.
6.4
Microphone & SOS Cable
Connect microphone with SOS button for listen-in and calling for help.
7.
Tracker Configuration
Refer to frequently used operation commands in this manual
8.
Tracker Operation
8.1
Power on and off
8.1.1
Power on: Insert a SIM card and connect the tracker to external power. It will turn
on automatically.
8.1.2
Power off: Remove the SIM card first, then disconnect the tracker from external
power. It will power off automatically around 5~10 seconds.
8.2
Location Search
8.2.1
Dial Query
Dial the tracker. Hang up in 10 seconds after ringing. Then the location
information will be sent to you through SMS. But if hold on more than 10 seconds,
it will enter the listen-in mode.
8.2.2
SMS Query
Send a location inquiry SMS command (refer to the Operation Command in this
manual) to the tracker. The location information will be sent to you through SMS.
8.2.3
Platform Query
Connect your tracker to the tracking platform then check the real-time position
online. (Additional tracking service charge may happen. Contact with your service
provider to get more details.)
8.3
SOS Alarm
In emergencies, press the SOS button and hold on for 1 second. An SOS alarm is triggered.
