Topfield TF 7050 HDRt, Руководство пользователя

Страница: 23 / 64

3.2 Local time setting 17
the other is a decoded signal. If your digital audio system does
not have a Dolby Digital decoder, you have to set the
Digital
Output (Dolby Digital Only) option to PCM . Otherwise, set it to
Bitstream .
NOTE
If the service you are currently watching does not provide
Dolby digital, you cannot watch the programme with Dolby
sound even though you set the
Digital Output option to Bit-
stream .
3.2 Local time setting
You should set your local time for timer events.
Select the System Setting > Time
Setting menu. You should see a
screen like the left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
To use Greenwich Mean Time,
take the following steps:
1. Set the Mode option to Auto ; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.1 .
3. Make sure that your local time is correctly displayed on
the Local Time option.
To set the local time manually, set the
Mode
option to
Man-
ual and enter your local time to the Local Time option with