Topex 29C908, Инструкция по эксплуатации

Страница: 7 / 36

7 topex.pl topex.pl
LASER LEVEL 29C908
Caution: Read the manual carefully before
using the laser level. Observe all safety
regulations and maintenance instructions.
SAFETY RULES
– The tool is designed for defining and checking
precision of horizontal, vertical and crossed lines with
the use of projected laser beams.
– Exercise caution when following safety
instructions and warnings. Failing to do so may
cause serious eye injury.
– Use the laser device in accordance with below
mentioned safety rules.
– Use and maintain the laser device in accordance with
the manufacturer’s instructions.
– IMPORTANT: Read entire manual before using the
tool. Do not remove any label from the tool.
– Keep the instruction manual for future reference.
– DO NOT LOOK AT THE SOURCE OF LASER BEAM.
Do not bring to accidental pointing the laser beam at
bystanders’ or animals’ eyes for a period longer than
0.25 second, for instance by pointing the laser beam
at mirrors.
– Do not, either intentionally or unintentionally, point
the laser beam at people or animals.
– Always ensure the laser beam points at stable
object without reflective surfaces. Appropriate
surfaces are, for example, wood and rough coatings.
Light, glittering, reflecting metal plates and similar
materials are not appropriate for working with laser,
because they may reflect the laser beam and point it
on the user.
–
CAUTION:
Never attach any optical device to the
laser. Do not use any optical device with the tool.
–
CAUTION:
Do not modify the device in any way, it
may cause dangerous radiation.
– All repairs should be carried out by the manufacturer
or authorized service point. Do not replace laser unit
with device of other type.
– You may find it difficult to observe laser beam in
strong sunlight and on some surfaces.
– Switch off the laser always when the laser level is not
used or when the tool is left unattended.
– Be careful when using the laser level, this is a precise
device.
– Store the tool beyond reach of children and domestic
pets. Do not allow children to operate the device.
– Store unused equipment in appropriate conditions:
in dry and clean place.
– Use of protective goggles is recommended.
GB
WARNING
LASER LIGHT, LASER RADIATION
DO NOT LOOK AT THE LASER BEAM
LASER DEVICE CLASS 2
Wavelength: 650 nm; Output: < 1 mW
EN 60825-1:2014
WARNING!
DO NOT allow children to operate the level.
WARNING! DO NOT look at the laser beam. LASER is
harmful to your eyes.
WARNING!
DO NOT point the laser beam at other
persons’ or animals’ eyes.
TECHNICAL SPECIFICATION
Laser wavelength 650 nm
Accuracy of vials located in the body: 0.5 mm/m
Laser power
≤1 mW
Rotational speed 0-500 rpm
Power supply 4 AA batteries
Working area 30 m
Weight 0.88kg
Class II
CONTENTS
1. Laser level (with base)
2. Four AA batteries
3. Plastic case
4. Tripod (40-110 cm)
5. Glasses to enhance laser visibility
TOOL PARTS (1)
a. Laser aperture (NEVER look at the source of laser beam)
b. ON/OFF button
c. +/- buttons
d. Level vials
e. Battery compartment
f. Adjustment knobs
g. Tripod
ASSEMBLY/SETTINGS
This tool is an easy to use laser level, which allows to
project vertical or horizontal red lines of laser light onto
walls surrounding defined plane. The level requires only
an easy installation on a tripod or placing it on a stable
surface, levelling with the use of vials located in the
level body and pressing the switch button. The level can
be used for indoor and outdoor works.
1. After taking the level out of the case open battery
compartment and insert AA batteries, observe pola-
risation markings (+/-). Close battery compartment.
2. Place the level on a ground as flat as possible. Screws
adjustment of the level base facilitate levelling the
tool (turn each of the screws to initially level the tool).