Topens RK990, Руководство пользователя

Страница: 9 / 22

6
Features:
·Easy to install, and minimum maintenance
requirement
·Midway mode
·Quick selection for gate open/close direction
·Reliable rolling code technology
·Emergency release key in case of power failure
·Stop in case of obstruction during gate opening
·Reverse in case of obstruction during gate closing
·Built in adjustable auto-closing (0, 30, 60, 90
seconds)
·Built in max. Motor Running Time (MRT) for
multiple safety protection (90 seconds)
·Reliable electromagnetism limit for easy
adjustment
·Can be equipped with wide range accessories
Installation Overview
Installation of the Opener
Caution:
*Be sure that the opener is installed in a level and paralleled position and is properly secured.
Improper installation could result in property damage, severe injury, and/or death.
* Before starting installation, ensure that there is no point of friction during the entire movement of
the gate and there is no danger of derailment.
* Ensure that the safety side panels are present.
Necessary Tools: The following tools may be necessary to install the Gate opener. You will need
screwdrivers, an electric drill, wire cutters and a wire stripper, a socket set, and possibly access to a welder.
When install the opener, you should build a concrete pad to support the base plate of opener in order to
maintain proper stability.
The installation proceeds are as follows:
1.
Dig a hole for a concrete pad which should be approximately 50 x 30 x 35cm (20
〞
x 12
〞
x 14
〞
). It may