Topens RK700, Руководство пользователя

Страница: 9 / 21

6
·Stop in case of obstruction during gate opening
·Reverse in case of obstruction during gate closing
·Built in adjustable auto-close (1-99 seconds)
·Built in max. Motor Running Time (MRT) for multiple safety protection (90 seconds)
·Reliable electromagnetism limit for easy adjustment
·Can be equipped with a wide range accessories
·Easy to install, and minimum maintenance requirement
Installation Overview
Installation of the Opener
Caution:
*Be sure that the opener is installed in a level and paralleled position and is properly secured.
Improper installation could result in property damage, severe injury, and/or death.
* Before starting installation, ensure that there is no point of friction during the entire movement of
the gate and there is no danger of derailment.
* Ensure that the safety side panels are present.
Necessary Tools:
The following tools may be necessary to install the Gate opener. You will need
screwdrivers, an electric drill, wire cutters and a wire stripper, a socket set, and possibly access to a welder.
When install the opener, you should build a concrete pad to support the base plate of opener in order to
maintain proper stability.
The installation proceeds are as follows:
1.
Dig a hole for a concrete pad which should be approximately 46 x 42 x 35cm (18
〞
x 16.5
〞
x 14
〞
). It may
protrude 10 cm (4”) above ground and 25 cm (10”) in depth underground. Increase the pad height if necessary
to protect the system from flooding, heavy snow etc.
2. Prepare one or more conduits for the electrical cables before pour concrete. Remember that cable conduits