Topens MultiRuta CASAR 800, Руководство пользователя

Страница: 25 / 33

22
4.9 Install HLR01 HomeLink Remote Control Kit (Optional)
4.10 Light Features
The Light is ON automatically when the unit is under operation. The Light will be automatically OFF if no
Door Control or Remote is pressed within 3 minutes.
Press the Remote or Wall Switch, the Light is ON. The Light will be also automatically OFF if no Wall Switch
or Remote is pressed within 3 minutes.
4.11 Trouble Shooting
Opener doesn't operate from either door control or remote:
• Does the opener have electric power? Plug lamp into outlet. If it doesn't light, check the fuse box or the
circuit breaker. (Some outlets are controlled by a door control.)
•
Have you disengaged all door locks? Review installation instruction warnings.
•
Is there a build-up of ice or snow under door? The door may be frozen to ground. Remove any
obstruction.
•
The garage door spring may be broken. Have it replaced.
Opener operates from remote but not from door control:
• Is door control button lit? If not, remove the bell wire from the opener terminals. Short the terminals by
touching both terminals at the same time with a piece of wire. If the opener runs, check for a faulty wire
connection at the door control, a short under the staples, or a broken wire.
•
Are wiring connections correct? Review step3.8.
Door operates from door control but not from remote:
Use a 2-core cable to connect the “DC+” terminal of
the HLR01 to the terminal 5, the “DC
－
” terminal to
the terminal 6.
Use another 2-core cable to connect the
“NO1”
terminal of the HLR01 to the terminal 1, the “COM1”
terminal to the terminal 2.