Topens KD702, Руководство пользователя

Страница: 12 / 27

10
12. Open the release hole plug on the top of the gate opener, insert the release key, and turn the key 90°
counterclockwise. This restores normal operation.
Mounting the Control Box
CAUTION: Install the Control Box in a well ventilated place protected against rain and
Step 1
To install the control box use the deck screws (not provided).
Even though the control box is waterproof designed, for safety
reason and a longer service life, it is recommended to install the
control box inside a secure surface and at least 100 cm (40 inches)
above the ground to avoid being flooded or buried under snow.
Step 2
Insert the power cable and cable of the first gate opener through the front
strain relief and into the control box by loosening the strain relief screw
located in the leftmost of outside bottom of the control box and feeding the
cables into the control box. Check the length of cables is long enough to
their respective terminal block in control box.