GB
for 26" Mountain Bike
FlashStand
FAT
User's Guide
* Maximum Weight Load:
20 kgs / 44 lbs
83˚~86˚
Adjust FlashStand
FAT
height to make sure your bike is within the
recommended angle of 83˚~86˚ (from horizontal plane) for stability
of your bike. Improper installation or lean angle may cause your
bike to fall and cause damage to it and/or FlashStand
FAT
.
IMPORTANT NOTES
80mm~ 180mm
(3.2"~7")
45mm (1.8")
60mm (2")
FlashStand
FAT
is designed to be used on bikes with crank-
arm width less than 45mm (1.8") at top 60mm (2") insert.
4mm
Allen Key
Support
Leg
If support legs on FlashStand
FAT
become loose, tighten its bolts
as shown. Do not over tighten the bolts as this may damage the
support legs.
FlashStand
FAT
is designed to be used on bikes with crank-
arm distance from the ground between 80mm and 180mm
(3.2"~7").
*
Please read all instructions and caution notes carefully before use.
