Topcon TRL-35, Руководство оператора

Страница: 19 / 48

Configuring the TRL-35
P/N 7010-0815
2-3
Configuring the TRL-35
As a Transmitter in
Modem-TPS in PDL Protocol
The TRL-35 provides high powered TX communication from the
base station to the rover. To configure the UHF radio modems, have
the following ready:
• PC running Windows 98, 2000, NT, or XP
• Modem-TPS version 2.2p0 or later
• TRL-35 Programming Cable, Topcon P/N 14-008107-01LF
• TRL-35 Power Cable, Topcon P/N 14-008110-01
To configure the UHF radio modem perform the following steps:
1. Connect the computer and TRL-35 using the TRL-35
programming cable.
2. Connect the power cable to the TRL-35 and confirm the power
LED is on.
3. Open Modem-TPS and on the connection dialog box, then click
Cancel
.
4. Go to
Tools Options
.
5. On the Options screen, change the
Connect modem
field to
External, and change the
Baud Rate
field to
38400
.
NOTE
To comply with RF exposure requirements,
maintain at least 25cm between the user and the
radio modem.
NOTE
Before connecting power to the TRL-35 confirm
the modem antenna is attached.