Topcon TRK-2P, Руководство пользователя, Страница: 47 / 118

45
BASIC OPERATIONS
BA
SI
C OPERATIONS
M
EASUR
E
M
ENT IN
REF/KRT
→
T
O
NO/PACHO CONTINUO
US M
EA
SU
R
EM
ENT M
O
DE
SETTING THE MEASURING RANGE
In this instrument, the measuring range can be switched in 2 steps between "1-30" and "1-60."
Normally, "1-30" is used, but if the patient's ocular pressure is high, switch it to "1-60." The default
setting is "1-30" upon power on.
1
Check the measurement screen.
2
Tap the button and set the measuring
range.
ALIGNMENT AND MEASUREMENT IN TONO/PACHO
1
When the pupil is displayed, tap the display around the pupil. The measuring head moves to
display the pupil image and alignment dot on the center of the screen.
NOTE
• If the pupil is not displayed on the control panel, move the measuring head
by press the control panel, checking the eye height mark on the measure-
ment window as a guide (See page 37).
• When the measuring head has reached the limit of movement (vertical/lat-
eral directions), a yellow-colored limit mark appears on the control panel
corner, showing it is the movement limit in that direction. Tap the display to
move the measuring head to a position that aligning is possible.
Patient ID Patient ID
/ 3 / 3 / 3 / 3
/ 3
/ 3
/ 3
/ 3
1 1
TOPCON̲TAROU TOPCON̲TAROU
Please touch
pupil on the screen.
MODE
R/K T/P
30/60
Patient ID Patient ID
/ 3 / 3 / 3 / 3
/ 3 / 3 / 3 / 3
1 1
TOPCON̲TAROU TOPCON̲TAROU
MODE
R/K T/P
P P P Pa Pa Pa Pa a t ti ti ti en en t t ID ID
Patient ID
/ 3 / 3 / 3 / 3
/ 3 / 3 / 3 / 3
1 1
TOPCON̲TAROU
TOPCON̲TAROU
Please touch
pupil on the screen.
MODE
R/K T/P
Patient ID Patient ID
/ 3 / 3 / 3 / 3
/ 3
/ 3
/ 3
/ 3
1 1
TOPCON̲TAROU TOPCON̲TAROU
Please touch
pupil on the screen.
MODE R/K T/P
Limit mark