3-1
3 ANGLE MEASUREMENT
3
ANGLE MEASUREMENT
3.1 Measuring Horizontal Angle Right and Vertical Angle
Make sure the mode is in Angle measurement.
3.2 Switching Horizontal Angle Right/Left
Make sure the mode is Angle measurement.
Operating procedure
Operation
Display
1
Collimate the 1st target (A).
Collimate A
2
Set horizontal angle of target A at 0° 00' 00".
Press the
{F1}
(0 set) key and press the
{F3}
(YES) key.
{F1}
{F3}
3
Collimate the 2nd target (B).
The required V/H angle to target B will be
displayed.
Collimate B
Operating procedure
Operation
Display
1
Press the
{F4}
(
↓
) key twice to get the function
on page 3.
{F4}
twice
2
Press the
{F2}
(R/L) key.
The mode Horizontal angle Right (HR)
switches to (HL) mode.
{F2}
3
Measure as HL mode.
Every time pressing the
{F2}
(R/L) key, HR/HL mode switches.
V :
90°10'20"
HR:
120°30'40"
0SET HOLD HSET
P1
↓
H ANGLE 0 SET
> OK?
--- --- [YES][NO]
V :
90°10'20"
HR:
0°00'00"
0SET HOLD HSET
P1
↓
V :
98°36'20"
HR:
160°40'20"
0SET HOLD HSET
P1
↓
V : 90°10'20"
HR: 120°30'40"
0SET HOLD HSET
P1
↓
TILT
REP V%
P2
↓
H-BZ
R/L CMPS
P3
↓
V : 90°10'20"
HL: 239°29'20"
H-BZ
R/L CMPS
P3
↓
