Topcon RL-HV Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 55

Topcon RL-HV Series Скачать руководство пользователя страница 37

34

8. CHANGING THE SETTINGS

After pressing the

key, pressing the

or

key will change the menu items and setting can be

performed for the functions listed below.



For Matching Mode, see "

Matching Mode (Manual Slope)"

Depending on the status of the location where the instruments are used, laser beam emission to unnecessary
direction can be shut off.

1. Press

key to display the menu screen.

2. Use the

key to position on the Mask display and press

the

key.

3. Select the direction you desire to mask using the arrow keys.

Each press repeats mask activating/releasing.

8.1

Masking (Laser beam shutter) setting

Matching Mode

Safety lock ON/OFF setting

Masking setting

Speed setting

Manual Mode ON/OFF setting

Arrow keys and masking setting
directions

RL-HV upper surface diagram
and masking directions

The state when masking is
not activated. (Laser beams
are emitted to all directions.)

The status in which the Y+
direction is masked.
(Laser beam is shut off in the
Y+ direction.)

Displays the masking direction

«
...
35
36
37
38
39
...
»

Содержание RL-HV Series
























































Отзывы:

Нет отзывов