Topcon RL-HV Series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 55

Topcon RL-HV Series Скачать руководство пользователя страница 15

12

4. PRODUCT OUTLINE

Parts of the instrument

4.2

Level Sensor LS-80X

Power switch

Detective precision switch

Buzzer sound switch

Indicator LS-80X Display

Beam receiving window

Index

(Back side of the instrument)

Buzzer

Indicator

Auto-cut off function
The power will be turned off automatically if no laser beam is detected for approximately 30 minutes.
(To turn on the level sensor, press the power switch again.)

Turn the beam receiving
window side towards RL-HV
to detect the laser beam.

Locate the datum position "---"
by moving the LS-80X up and
down. Directional arrows and
audio signals assist in locating
the datum position as the laser
strikes the beam receiving
window. (Top of LS-80X is 40mm
(1 9/16") from on-grade index for
offset marking.) The indicators
are located on front and back
sides of the instrument.

Volume of the sensor buzzer can
be alternately switched to
Quiet/Loud/OFF by pressing the
switch.

Two detective precision options
are available, normal precision
(±2mm) and high precision
(±1mm). By pressing this switch,
the precision options are
switched alternately.
Confirm the precision choice by
the indicator. (Normal precision
is the default setting each time
the sensor is turned on.)

The power switch turns ON or
OFF by pressing.

«
...
13
14
15
16
17
...
»

Содержание RL-HV Series
























































Отзывы:

Нет отзывов