Topcon Pocket-3D Скачать руководство пользователя страница 172 | Manualshive

Страница: 172 / 316

Topcon Pocket-3D Скачать руководство пользователя страница 172

Data Menu

Pocket-3D Reference Guide

3-62

Figure 3-90. alignment Layers Options

•

Edit

– on the

Layers

dialog box (Figure 3-89 on page 3-61),

press to

edit the selected layer. See the “New” bullet and

Figure 3-90 for details on editing the layer.

•

Delete

– on the

Layers

dialog box (Figure 3-89 on page 3-61),

press to remove the selected layer.

Linework

Used in 3D GPS+, Total Station, Robotic applications, and 3D LPS
applications, the Linework menu creates, edits, and deletes Linework
files. Linework files can also be copied between the Pocket-3D and
the Control Box using a Flash Card.
Linework files contain layers comprised of polylines identified with
different names and colors. The linework represents features or
objects on the project, such as building pads, curbs and sidewalks, top
and toe of slopes, or the boundary of the project.
If a linework file imported from 3D-Office to Pocket-3D contains
text, that text displays on the main screen as well.

Current File or <none>

Displays the currently loaded Linework file. If no file is currently
loaded, “<none>” displays.

«
...
170
171
172
173
174
...
»

Содержание Pocket-3D





























































































































































































































































































































Отзывы:

Нет отзывов