Topcon NORAC UC4.5, Руководство по установке

Страница: 19 / 23

16
6 Software Setup
1. Start up the sprayer and test the sprayer’s functionality. The NORAC Control Panel does
not need to be powered on for the original boom function switches to operate. Unfold the
booms and raise/lower each boom and the main section.
Confirm that the cabling and hoses are agreeable to the entire range of motion.
2. If any functions do not work, review the hydraulic and electrical portions of this manual to
check for proper installation.
If the roll direction is opposite to the operator’s preference when pressing the
switches, reverse the direction by swapping the connectors on the 3
rd
station
expansion block.
3. Turn on the power for the UC4.5 Control Panel using the switch on the side of its chassis.
4. The procedure for the installation of the UC4.5 Spray Height Control system is now
complete. Begin the AUTOMATIC SYSTEM SETUP procedure as described in the UC4.5
Spray Height Control Operator’s Manual.