Topcon MC-4S Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 76

Topcon MC-4S Скачать руководство пользователя страница 9

7

GENERAL MAINTENANCE INFORMATION

USER MAINTENANCE

To ensure the safety and performance of this instrument, all maintenance work, unless specified in this
manual, shall be conducted by trained service engineers.
The following maintenance tasks may be done by the user.
For details, see "MAINTENANCE" in this manual.

CLEANING THE CHART WINDOW

The chart window of the instrument can be cleaned by the user. For details, refer to “Cleaning the
chart window” on page 57 in this manual.

CHECKING THE SCREW FOR THE SUPPORT METAL FIXTURE FOR LOOSE-
NESS

The user can check if the screws for the support metal fixture are loose. For details, refer to “USER
MAINTENANCE ITEMS” on page 58 of this manual.

DISCLAIMERS

• TOPCON shall not take any responsibility for damage due to fire, earthquakes, actions by third per-

sons and other accidents, or damage due to negligence and misuse by the user and any use under
unusual conditions.

• TOPCON shall not take any responsibility for damage derived from inability to properly use this

instrument, such as loss of business profit and suspension of business.

• TOPCON shall not take any responsibility for damage caused from using this instrument in a man-

ner other than that described in this user manual.

• Diagnoses made shall be the responsibility of pertaining doctors and TOPCON shall not take any

responsibility for the results of such diagnoses.

«
...
7
8
9
10
11
...
»

Содержание MC-4S













































































Отзывы:

Нет отзывов