Topcon KR-1W, Инструкция по эксплуатации

Страница: 151 / 188

149
FUNCTION SETTING USING SETTINGS
SELECTING THE OUTPUT DATA STYLE (OUTPUT DATA)
The output data style can be selected. Before shipment, the default setting is "R/K."
1
Tap the Set Condition button of the set item display "Output Data" of "COMM."
1/1
REF
KRT
R/K
ON
SETTINGS
REF
STD1
2400
RS-232C
Output Data
RS Format
RS Baudrate
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
2
Tap the Setting Change button and set the data style:
"REF" : Output REF measurement data only.
"KRT" : Output KRT measurement data only.
"R/K" : Output both REF measurement data and KRT measurement data.
3
Setting is complete.
STTING THE COMMUNICATION FORMAT (RS FORMAT)
The communication format can be set. Before shipment, the default setting is "STD1."
1
Tap the Set Condition button of the set item display "RS Format" of "COMM."
2
Tap the Setting Change button and set the desired format
• When the setting of output data style is REF, KRT, REF/KRT:
1/1
SETTINGS
STD1
STD2
RS-232C
Output Data
RS Format
RS Baudrate
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
ON
REF
STD1
2400
To output all data of REF and KRT measurements, select "STD2."
3
Setting is complete.
For questions about the RS-232C communication format, contact your dealer or
TOPCON, as shown on the back cover.
To output data from the USB output terminal, STD1 or STD2 is used regardless of
the setting here.