Topcon KR-1 Скачать руководство пользователя страница 31

Страница: 31 / 76

BASIC OPERATIONS

Alignment starts automatically, and measurement is performed. The measurement result

is displayed.

When Right/Left eye continuous measurement is selected, the instrument measuring

head moves automatically from the right to the left eye.

DISPLAYING MEASUREMENT VALUES

Data of the latest measurement are displayed on the control panel screen.

Figures only: Measurement was done correctly.
ERROR:

Measurement was not done correctly.

When auto print setting is "OFF" in the initial setting, print out measurement results by tapping
the Print button, as necessary.

NOTE:

If auto mode measurement does not work, select manual mode.
Auto mode measurement may not work depending on the cornea
condition.

NOTE:

If the machine is moved before measurement values are displayed, it
might cause an incorrect measurement.

Auto print (available only under Auto mode)
When auto print setting is "ON" in the initial setting, the buzzer sounds twice after
measuring the right and left eyes, and measurement results are printed out auto-
matically.

For explanation of the messages on the control panel screen, refer to “MESSAGE
LIST” on page 54.

R/K

13.75

-1.

-1.25

-0.

-0.50

7.80

7.75

180

PR2

0000100001000

PR1

3/3

AUTO

7.80

0/3

3/3

0/3

PR1

PR2

PA1

LOW

FOG

Содержание KR-1













































































Результаты поиска

Содержание KR-1

Отзывы:

Topcon KR-1, Руководство пользователя, Страница: 31 / 76

Результаты поиска

Содержание KR-1

Отзывы: