Topcon HiPer V, Руководство оператора

Страница: 37 / 122

Managing Power
24 P/N: 1001608 ‐ 01
• • • • • •
Managing Power
This chapter describes how to power the receiver, charge the detachable batteries, and use an external power source.
Turning On/Off the Receiver
To turn on the receiver, press and hold the power button until the LEDs briefly flash. When the receiver is turned on, the receiver’s
channels initialize and begin tracking all visible satellites at any time and location.
To turn off the receiver, press and hold the power button for more than three and less than 10 seconds (release the power button
when the BATT LED blinks solid red). This delay prevents the receiver from being turned off by mistake.
Using Internal and External Power Sources
The receiver is powered by the detachable batteries or an external power source connected to the power port. If an external power
source is connected, the receiver draws power from it over the battery.
The receiver will draw a small amount of power from the batteries when it is turned off. If the receiver is
placed in storage for a long period, such as a few months, the batteries may become fully discharged. You will
need to use an external power supply or recharge the batteries before use.