Topcon GR-5, Руководство оператора

Страница: 74 / 202

GR-5 Configuration
GR-5 Operator’s Manual
3-2
†
Set up the Base receiver over a known point to begin collecting
static observation data and transmitting corrections. Set up the
Rover receiver to begin collecting RTK data. See “Receiver
Setup” on page 4-1 for more information.
When configuring receivers for post-processing surveying,
use
the following checklist to ensure the receivers are properly set up.
†
Perform pre-survey functions as described in Chapter 2.
†
Configure one receiver as a Base station and the other receiver as
a Rover. See “Configuring the Receiver Using PC-CDU” on
page 3-31.
†
Set up the Base receiver over a known point to begin collecting
static observation data. Set up the Rover receiver to begin
collecting static or kinematic observation data. See “Receiver
Setup” on page 4-1 for more information.
Managing the Radio Modem
TRU is Topcon’s radio modem configuration utility for modems
embedded in Topcon receivers. TRU provides the following
functions:
• Connecting a computer to an integrated radio modem via a serial
port or Bluetooth wireless technology.
• Displaying information about the radio modem installed in the
receiver.
• Programming the radio modem’s settings.
To configure the radio modem, have the following ready:
• PC running Windows 2000 or newer
• TRU
• A Serial cable or Bluetooth wireless technology capabilities