Topcon FC-6000, Руководство оператора

Страница: 25 / 62

Chapter 3 Optional Features and Accessories
21
4. An image on the battery compartment label shows the correct
location and orientation for the SIM card (slot on the left). Pull
the flexible card holder back out of the way. Push the card into
the slot to insert it.
5. Push the flexible card holder back into place, covering the card
slots.
6. Replace the battery pack, and attach the battery door.
To remove the SIM card, gently pull it out with tweezers or a piece
of tape.
Note: If the modem was on before shutting the FC‑6000 down
to insert the SIM card, you are prompted to configure the data
connection when you reboot.
RS‑232 Port
An RS-232 9-Pin D-Sub connector is an option for the FC-6000.
Depending on the factory configuration, it will provide either 5 VDC
or 12 VDC on pin 9.
There is a RS-232 Control Panel to configure the behavior of the
RS-232 port. There is a link to it on the desktop.
SIM Card
Slot
Flexible
Card Holder