7-4
7 DATA COLLECTION
7.1.2 Selecting a Coordinate File for Data Collection
When coordinate data in a coordinate data file are used for occupied point or backsight point, select a
coordinate file from the data collect menu 2/2 beforehand.
Operating procedure
Operation
Display
1
Press the
{F1}
(SELECT A FILE) key from DATA
COLLECT menu 2/2.
{F1}
2
Press the
{F2}
(COORD.DATA) key.
{F2}
3
Select a coordinate file in the same manner as
Section 7.1.1 “Selecting a File for Data Collection”.
DATA COLLECT 2/2
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG. P
↓
SELECT A FILE
F1:MEAS.DATA
F2:COORD.DATA
SELECT A FILE
FN:
INPUT LIST --- ENTER
