6-27
6 SPECIAL MODE (Menu Mode)
6.6.1 Input Start Point
To input the start point, carry out the following operating procedure.
Operating procedure
Operation
Display
1
After pressing the
{MENU}
key, press the
{F4}
(P
↓
),
{F2}
,
{F4}
key to get the programs menu on
page
2/2.
{MENU}
{F4}
{F2}
{F4}
2
Press the
{F3}
,
{F1}
,
{F1}
key.
(
Refer to “Input start point” on page 6-26.)
{F3}
{F1}
{F1}
3
Input coord N, E.
4
Press the
{ENT}
key.
Input coord
{ENT}
5
Input value data CHAIN, INTERVAL.
6
Press the
{ENT}
key.
Input data
{ENT}
For
[ROAD]
, in addition to the “Start Point” and “Road Data” input files, other files necessary for the
calculations are created. Consequently, if the free area of the memory reaches 10% or less, a
“MEMORY POOR” warning message is displayed. (In this case, the instrument can still be operated.)
CHAIN and INTERVAL input range
-50,000m
≤
CHAIN
≤
500,000m
0m<INTERVAL
≤
5,000m
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P
↓
START POINT
N = 0.000 m
E : 0.000 m
--- --- [CLR] [ENT]
START POINT
CHAIN = 0.000 m
INTERVAL:100.000 m
--- --- [CLR] [ENT]
<SET!>
INPUT DATA
F1:START POINT
F2:H ALIGNMENT
