5. BASIC OPERATION
18
I
Switching to Program mode
G
• Do not switch between modes by
{PRG}
or not turn OFF the power just after pressing
{PRG}
(during displaying the message "Executing program mode").
I
Switching target type
C
$
• Changes can also be made by tapping the icon on status bar or in Starkey mode.
C
"5.2 Display Functions", "5.4 Starkey Mode"
I
Switching the Laser-pointer/Guide light ON/OFF
$
• Changes can also be made by tapping the icon on status bar or in Starkey mode.
C
"5.2 Display Functions", "5.4 Starkey Mode"
I
Switching the page
I
Inputting letters/figures
{PRG}
Switches to program mode / basic mode
{
}
Switches between target types
Prism/360° Prism/Sheet/N-prism (reflectorless)
{
}
(Press and hold
until
a beep sounds)
Turn ON/OFF the laser-pointer/guide light
{FUNC}
Toggle between Observation mode screen pages
{
α
}
Switch between numerals and alphabetic characters
{SHIFT} +
{1} to {9}
In alphabetic characters mode, switch between lowercase
characters and upper case characters each time
{SHIFT}
(Press and hold)
In alphabetic characters mode, switch between lowercase
characters and upper case characters
{SHIFT}
+ {
α
}
Display/hide <Input Panel>
{0} to {9}
Input numeral or symbol printed above the key (during numeric
input mode)
Input alphabetic character in the order they are listed (in
alphabetic input mode)
{.}
Input a decimal point (during numeric input mode)
Input code (in alphabetic input mode)
{±}
Input a plus or minus sign (during numeric input mode)
Input code (in alphabetic input mode)
