Topcon CropSpec AGA5408, Руководство оператора, Страница: 50 / 66

4.4. Configuring Japanese wheat prescription types
34
4.4. Configuring Japanese wheat pre-
scription types
4.4.1. Configuring Yousui prescription
Yousui prescription type uses a nitrogen application rate that
corresponds with the average CropSpec value for the field to vary the
applied nitrogen rate as the CropSpec value increases and decreases.
To configure Yousui prescription type, you need to determine the
average CropSpec reading for the field (this figure is entered into
Crop Sense R ). To collect the reading, drive through the part of the
field that represents the best average sample for the entire field. Refer
to Recording CropSpec readings, page 19 for details on recording
average CropSpec readings. Enter the following data values to
complete the configuration:
l
Concentration % : The ratio of the active ingredient in the
product being applied (nitrogen if
Nitrogen Content based
Mass/Area
selected in output configuration, see page 14).
l
Minimum Rate
: The minimum rate of the active ingredient that
should be applied relative to the amount of biomass detected.
l
Maximum Rate
: The maximum rate of the active ingredient that
should be applied relative to the amount of biomass detected.