Topcon BM-7AC, Инструкция по эксплуатации

Страница: 69 / 91

4. Communication With a PC
67
4.2.15 FO Command
The area correction can be deactivated by this command.
PC Command BM-7AC
FO + (Cr ･ Lf)
OK + (Cr ･ Lf)
4.2.16 CGL Command
The chromaticity area data in the area correction function per group units can be cleared by this
command.
CGL [n] : Number of area correction factor groups to be cleared. 1 to 10
PC Command BM-7AC
CGL1 + (Cr ･ Lf)
OK + (Cr ･ Lf)
4.2.17 FGR Command
The number of the area correction factor group currently being used can be read out by this
command.
PC Command BM-7AC
FGR + (Cr ･ Lf)
OK + (Cr ･ Lf)
Group Number
END + (Cr ･ Lf)