Topcon AGA5495 Скачать руководство пользователя

Страница: 52 / 144

5.3. Setting up alarms

Note

: If RTK is selected and an AGI-3 or AGI-4 is connected, the

base station settings can be automatically synced with the entered
receiver settings. Select

System

GPS

Base Station Sync

and

follow the instructions displayed on the wizard.

VTG legacy mode

: Supports VTG data output for NMEA

standards below V4.00. Outputs VTG strings compatible with
NMEA V3 and below.

5.3. Setting up alarms

If no implements have been set up in the system, only General alarms
are available to set up.

To set up general alarms:

1. Select

System

Alarms

General

The list of general alarms is displayed. All general alarms may be
enabled or disabled by selecting

All General Alarms

Alternatively, each general alarm may be enabled or disabled
independently.

Note that for safety reasons, the

Steering Engage/Disengage

audible

alarm may not be disabled.

The

End of Row

alarm requires extra information. This alarm sounds

and displays when the vehicle is approaching the boundary and the
operator should slow down to prepare for manual control.

First Distance

: Distance from the boundary at which the alarm

will first trigger. Distance is measured from the tractor to the
boundary along the wayline (guideline).

Second Distance

: Distance from the boundary at which the

second alarm will trigger, warning the operator to immediately
take control of the vehicle.

Look Ahead Distance

: Sets how many meters in front of the

vehicle that the system looks to respond with actions.

5.3.1. Alarm window description

To acknowledge an alarm, press the center of the alarm window.

Содержание AGA5495

















































































































































Результаты поиска

Содержание AGA5495

Отзывы:

Похожие инструкции для AGA5495

Бренды по названию

Популярные бренды

Topcon AGA5495, Руководство оператора

Результаты поиска

Содержание AGA5495

Отзывы:

Похожие инструкции для AGA5495

Бренды по названию

Популярные бренды