Topcon AGA5495, Руководство оператора

Страница: 104 / 144

12.2. Selecting an existing job
86
2. Select the region types to be included and excluded for the
current job.
Note : Areas that will be treated are shown as a lighter grey area on
the map (if auto section control is enabled and the Boundary Limit is
not set to Unlimited).
12.2. Selecting an existing job
Job information can be recorded, stored and transferred for later
access.
Drive to the field and follow the steps to choose an existing job. To
create a new job, refer to Creating a new job, page 85.
1. Before selecting an existing job, ensure the correct field is
selected (refer to Selecting a client / farm / field, page 77).
2. To choose from a list of existing jobs, select
/
Job Menu
/ Select Job .
3. Select the job and confirm.
Note
: Changing the client, farm or field at the top of the Select Job
window allows importing of a job from a neighboring field. This can
be useful in order to reuse common information stored within the job,
such as weather observations, crop information or product application
notes. The coverage should be cleared manually before starting the
new job. See Clearing a job, page 88.
Note : The same implement that was used to create the job must be
selected to load an existing job.
12.3. Recording job details
The console can record details of the job and store and export these.
1. Select
/ Job Menu / Record Job Details .
Weather and site conditions are optional. Adding some crop and
product information is recommended.
2. Select a category, enter the information and confirm.