4
UCOM Starlight 100
Baby Bath Thermometer 100
4
3
BATTERY REPLACEMENT
•
Remove the battery compartment
cover carefully with a small coin (A).
•
Install 2 x L1142 batteries (3V DC)
following the polarity as shown.
•
Reposition the battery cover.
When LCD indication flashes, the
batteries must be replaced.
Batteries must be removed before disposing of the device.
Dispose of the batteries in an environmental manner according to your country
regulations.
4
CARE AND MAINTENANCE
•
Clean the thermometer by using isopropyl alcohol or soap and water before and
after use.
•
Store Bath Thermometer in a cool, dry place and away from direct sunlight while
not in use.
•
Do not open the bath thermometer except to replace the battery.
•
Do not drop the thermometer, as this may ruin the unit.
•
Turn off the bath thermometer soon after use to save battery and prolong the
battery life.
5
DISPOSAL OF THE DEVICE
At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used products you make an
important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the
collection points in your area.
++
A
HL_Baby bath Thermometer A1.book Page 4 Monday, December 28, 2009 9:23 AM