Top Innovations HANDYMENDER SP-400 Скачать руководство пользователя страница 1

 

 

 
 
 

Top Innovations, Inc.   

Innovative Products to Make Your Life Easier 

 

  

Model SP-400 

 

Owner’s Manual

 

 
 

 
 
 
 
 
 
 
 
 

¾ 

Sews Durable Chain Stitch 

¾ 

Compact Size for Emergency Repairs 

¾ 

Pre-Threaded and Ready to Use 

 
 

 

Top Innovations, Inc. 

400 NW Platte Valley Drive   Riverside, MO  64150 

(800) 711-6617    (816) 584-9700    Fax:(816) 584-9066 

www.mitcoproducts.com 

 

 

2

 

 

Dear Valued Customer:                                                                   

Thank you purchasing your HandyMender Hand Held Stitching 
Machine from our rapidly growing Sew Pro line. Our firm takes pride 
in providing you products with quality and value while offering 
excellent service.  

The HandyMender Mending Machine will become a valuable 
tool that will keep your family’s wardrobe in shape.  Although 
not designed to make complicated clothing from scratch, it 
provides durable chain stitching for your basic mending jobs 
quickly and with a quality stitch.  This machine was 
specifically designed to be lightweight for easy portability.  
We are confident you will enjoy the time you spend using our 
product.     

Top Innovations, Inc. would like to invite you to take 
advantage of our customer support web site at 
www.mitcoproducts.com.  Here you will find additional 
information about the many other exciting Sew Pro and 
Steam Fast products that are available.  We take pride in our 
quality line-up of garment care and steam cleaning products 
and hope you will visit our web site to review our product 
line.  

 

Benny Lee 

Chairman and CEO, Top Innovations, Inc. 

Содержание HANDYMENDER SP-400










Отзывы: