Top Global USA. ----MB6800 User Guide
2.4 LED
Indicators
MB6800 has five two-color LEDs to indicate the working status. The following table shows
the status when the MB6800 is configured successfully and running properly.
Table 2-1
Normal LED Indications
Power WLAN
WWAN Ethernet
LAN
Ethernet
WAN
Off
Power off
Disabled
Card inserted;
No Internet
connection
No cable
No cable
Green Power on and
normal
Enabled Card
inserted;
Internet
connected
100Mbps mode 100Mbps mode
Green
Blink
N/A Enabled
and
data
transmission
Card inserted;
Internet
connecting
100Mbps
mode, and data
transmission
100Mbps mode,
and data
transmission
Red
N/A
N/A
No card
10Mbps mode
10Mbps mode
Red
Blink
N/A N/A
N/A 10Mbps
mode,
and data
transmission
10Mbps mode,
and data
transmission
Amber System
error N/A
N/A
N/A
N/A
Amber
Blink
System booting
or upgrading
firmware
Enabled and
data
transmission
error
N/A N/A N/A
2.5
Initialize the MB6800 Unit
1.
Connect MB6800 with your computer, there are two ways to connect MB6800 with
your computer:
I.
Connect your computer to MB6800 using the
attached Ethernet cable and
your computer is set to be “Obtain an IP address automatically”.
- 9 -
