TOORX BRX Compact MultiFit, Инструкция по эксплуатации

Страница: 10 / 18

LOAD ADJUSTMENT
To increase the load, turn the Adjustment Knob (B32) clockwise.
To decrease the load, turn the Adjustment Knob (B32) counterclockwise.
There are eight levels for the load adjustment.
SEAT ADJUSTMENT
Proper seat adjustment is important.
1.
Turn the Adjustment Knob (D1) to loosen, then pull the Adjustment
Knob (D1) to release the pin. Slide the Seat Post (A6) until the Seat
(B24) is at the proper height. Release the Adjustment Knob (D1)
making sure the pin catches in one of the holes of the Seat Post
(A6) and tighten the Adjustment Knob (D1)
2.
Sit on the seat and place your feet on the pedals. You
should be able to move through a complete pedal stroke
without locking your knees or shifting your hips on the seat.
The seat is too close to the pedals if you have more than as
light bend in your knees at the bottom of the pedal stroke.
The seat is too far from the pedals if you have to completely
straighten your knees at the bottom of the pedal stroke.
Refer to the illustration.
CAUTION:
1. Do not attempt to adjust the seat while you are on the
BIKE.
2. Always tighten the Adjustment Knob (D1) after adjusting
the seat to a new position.