TOOLSTATION
1-STAGE POINT OF USE FILTER 84582
Guarantee
This product for the period of one year from the date of purchase against any manufacturing fault. The guarantee is only valid if the product has been installed and
used in accordance with the manufacturers instructions and has not been interfered with in any way. Damaged caused to the product or by the product as a result of
failure to use the product in accordance with the manufacturers instructions is not covered by this guarantee. Under this guarantee we undertake at our discretion to
repair or replace free of charge the product of any part which is found to be faulty. Costs associated with the fitting of a replacement product or part or the removal of
the product is not covered by this guarantee. Loss or damage caused by the product (including consequential loss) is not covered by the guarantee. This guarantee
does not affect your statutory rights.
DIY-TS-84582 Revision 02 Date: 08/16
KEY PART NO
DESCRIPTION
QTY. COLOUR
1
ZA-CART-002013
10” Slim Cartridge
1
White
--
ZA-DIY-004002
Toolstation Inhouse Instructions
1
2
ZA-DWFK-003003 Self Cutting Tap
1
Chrome
3
ZA-DWFK-003004 CalTap lever drinking tap
1
Chrome
4
ZA-DIY-004001
1/4” male - 3/8” reducer (brass)
2
Brass
5
ZA-DWFK-003006
3/8” pipe
1
Various
6
ZA-DWFK-003007 Drinking tap fitting 3/8 x 7/16
1
Grey or White
7
ZA-DWFK-003008
3/4”F - 3/8” pushfit fitting
1
Grey
8
ZA-DWFK-003021
2 1/2” single clip/slim filter clamp
1
White
9
ZA-GEN-PLUG
6mm wall plug
1
Grey
10
ZA-GEN-SCREW
1 1/4” screw
1
Zinc Plated
11
ZA-DWFK-003005
3/8” Pipe Insert
2
Grey
21
Select a suitable position for the filter kit to
be installed noting that the length of flexible
pipe supplied is used to connect both the
touch tap and the self piercing tap to the
filter. This kit is intended for cold water
supply only.
BEFORE CARRYING OUT ANY
INSTALLATION CHECK CONTENTS OF
PRODUCT ARE CORRECT
TURN OFF THE WATER SUPPLY AT THE
MAINS STOP COCK
All contents are checked
and sealed in a security
bag. Please check the
contents carefully prior to
installation.
Exchanges or refunds can
only be made on receipt of
the product in full working
order with no parts
missing or broken.