ToolPRO CPS18LD.9, Инструкция по эксплуатации

Страница: 13 / 16

Customer Helpline 1300 889 028
13
Operating Instructions
G H
OPERATION
1. OPERATING THE ON/OFF SWITCH (SEE FIG. G)
To start your sander, depress the protective cover over the switch at the position marked
“I”. To stop your sander, depress the protective cover at the position marked “O”.
2. FLUSH SANDING FACILITY (SEE FIG. H)
Your sander can sand flush on three sides of the base-plate which allows easy access to
corners and edges of moulding.
3. ORBITAL SANDING
Your sander operates in small circular rotations which allows efficient material removal.
Operate your sander in long sweeping movements across your workpiece and even
across the grain. For a finer finish, always use a fine grain sandpaper and only move the
sander in the direction of the grain and never across the grain.
Do not allow your sander to remain in the same position otherwise you will remove
material and create and uneven surface.