@ToolkitRC 2021
7
Quick start
1，Connect the M4 Pocket to a suitable DC 7.0-25.0V to
power outlet.
2，The display shows the boot logo for 2 seconds.
3，After booting up, the screen enters the main
interface as shown below:
4，Short press [Voltage/Current] key to unlock the
system and start adjusting parameters.
5，Long press [Voltage/Current] key to set the charging
cut-off voltage.
6，Short press [Voltage/Current] key to select the
charging current.
7，When the output main port and the balance port
voltage match, the M4 pocket will automatically start
charging.