8
TOOLS REQUIRED:
1. FRONT AXLE ASSEMBLY
• Turn over the vehicle body and cut off the
plastic tie on the front wheel axle with
scissors.
• Remove the M5 screw, washer and nut
from the front wheel axle.
• Adjust the wheel axle so that the axle is in
the correct position as shown in diagram;
then reinsert the M5 screw and the Ø5
washer as shown, making sure the M5
screw goes through the holes in the metal
plates A and B (ensure plate A sites over
plate B as shown in the diagram and
indicated by a stopper, to avoid fingers
being trapped while steering), and tighten
securely with the nut under it.
ASSEMBLY
Your new vehicle requires adult assembly. Please set aside around 35 minutes
for assembly. Please identify all parts before assembly and save all packaging
material until assembly is complete to ensure that no parts are discarded.
Phillips Screwdriver
(not included)
17mm Socket Wrench
(included)
Standard Slip Joint Pliers
(not included)
WARNING
Children can be harmed by small parts, sharp edges and
sharp points in the vehicle's unassembled state, or by electrical items. In
the unassembled sate, this package contains small parts. Adult assembly is
required; children should not handle parts, or help in assembly of the vehicle.
