19
DETAILED MAINTENACE AND REPAIR
Turn power “OFF” before conducting any maintenance procedures.
Tools Required:
HOW TO REPLACE FRONT WHEEL
1. Remove the Axle Cap with a flat head screwdriver.
2. Remove the M10 locknut with a 17mm socket wrench.
3. Remove the Ø12 washer .
4. Remove the wheel, then replace with a new one and make sure the Ø12
bushing sits inside the wheel.
5. Remount the Ø12 washer, M10 locknut and securely tighten the wheel; then
re-insert the axle cap.
HOW TO REPLACE REAR WHEEL AND GEAR BOX
1. Remove the Axle Cap with a flat head screwdriver.
2. Remove the M10 locknut with a 17mm socket wrench.
3. Remove the Ø12 washer.
4. Remove the driving wheel, and replace with new wheel.
Flat head Screwdriver
(not included)
17mm Socket Wrench
(included)
