Tone Bliss Crunch Machine, Руководство пользователя

Страница: 12 / 14

12
This channel offers Plexi-style tones, definitely focused on rock styles.
Tone settings
The Bass [6] , Middle [7] and Treble [8] controls allow you to shape your tone in greater detail.
The range has been limited to +/- 6 dB though, in order not to alter the Plexi-specific tone.
The Raw
[5] switch, once set in the upper position, bypasses the Bass [6] , Middle [7] and Treble
[8] controls. You instantly get the Plexi-specific tone applied to your raw guitar signal. The tone
has more ‘bite’ and reflects even better the personality of your guitar.
The Bright
[4] switch adds some treble, independently from the Bass [6] , Middle [7] and Treble
[8] settings. This can be used to give more sparkle to a humbucker pickup.
Gain / volume controls
The gain [9] control sets the preamplifier distortion level.
The volume
[10] control allows to set the perceived volume ; above 6 (approximately) it sets the
power amp distortion (overdrive).
By playing with these 2 controls, you will be able to dial-in the right mix between preamp
distortion and power amp distortion.
Note : when the Rock channel is active, the Channel
[11] indicator is on.
8. Footswitch
The footswitch allows to control certain functionalities from the tip of your feet. On the
Crunch
Machine
, 2 functionalities are selectable :
The boost on the classic channel
The active channel
Below is a picture of the footswitch :