TomTom 4PL50, Руководство пользователя

Страница: 136 / 177

136

"Go via a parking lot" and "Go via a gas station"

"Display My Places" and "Recent destinations"

"Travel via a recent destination," and "Travel via a saved place"

"Report safety camera"

"When will I get there?"

"Mark the current location"

"Add current location to My Places"

"Clear route"

"What's the next instruction?"
Device settings

"Volume 70%", "Volume up", and "Volume down"

"Mute", and "Sound on"

"Instructions on", and "Instructions off"

"Day colors", and "Night colors"

"2D view", and "3D view"

"Zoom in", and "Zoom out"
Saying commands in different ways
Your PRO recognizes many more words than just the ones you see in the list of commands, so try
some of your own words. You can say other words that have the same meaning, for example you
can say the following words:

"OK," "Correct" or "Right" instead of "Yes" when you want to confirm what you said.

"Navigate to," "Look for" or "Nearest" instead of "Drive to" when you want to drive to a gas
station.

"Cancel" or "Delete" instead of "Clear" when you want to clear your current route.
Entering an address using voice control
Note: If spoken address entry is not supported in your current country, voice control is stopped
and the address entry screen is shown. You can enter the address in the normal way using the
keyboard.
The following example shows how to use voice control to plan a trip to an address or a location:
1.
In map view or guidance view, say the wake-up phrase to start voice control.
The voice control screen is shown and your PRO says "I'm listening." When voice control is
ready to listen, you see a microphone icon in the bottom left corner and you hear a beep.
2. Say "Go to an address" or "Go to a saved location."
Tip: Say "All commands" to see a list of commands you can say. Alternatively, select Help in
the Main menu, then select Voice control and then select Which commands can I say?.
For some commands, your PRO repeats what you say and asks for confirmation.
3. If the command is correct, say "Yes."
If the command is incorrect, say "No" and repeat the command after you hear "I'm listening."