TOMCAR Utility Vehicle, Руководство по обслуживанию, Страница: 14 / 150

Tighten the Banjo Bolt. Start the engine and
inspect the fuel filter housing and Banjo Bolt for
leaks before driving. Tighten the Banjo Bolt. Start the engine and
inspect the fuel filter housing and Banjo Bolt for
leaks before driving.
Air intake system
Inspect all air intake hoses for any visible
damage.
Check that all hose clamps (1) and (2) are tight
and are positioned correctly.
Remove and clean the front cone filter.
Remove and replace the rear air filter (3).
Front Filter TM3801
Inner Air Filter TM84050
Outer Air Filter TM84040
Cooling system
Inspect the upper and lower radiator hoses (1)
for damage.
Make sure all hose clamps are tight and
positioned properly.
Inspect the radiator and fans, and thoroughly
clean area.
Inspect the radiator cap. Make sure the rubber
seal is in good condition.
Check the coolant overflow bottle for leaks and
fill bottle to the full level.
Transmission oil
Position vehicle on level ground
Remove the fill plug.
Remove the drain plug and drain oil into drain
pan.
Clean and reinstall drain plug. Small metal
shavings on magnet are normal.
Fill transmission with 2.5 qrt of 80w90 gear oil.
Make sure the transmission breather is clean.
Reinstall fill plug.
3
1
2
1
TOMCAR USA, Inc. | 1727 E. Deer Valley Road | Bldg. 2, Ste. 1 | Phoenix, AZ 85024
11
06222010-v2.0