44
FULLY BIOLOGICAL MINI SEWAGE TREATMENT PLANT FOR YACHTS, HOUSEBOATS AND MOBILE HOMES
enteron | User Manual
We deliver all controllers with preset date and time on ME(S)Z Berlin, Vienna, Paris. You can easily adjust the
settings yourself to control and adapt them to your current vessel location. To do this, you must change the
operating mode of the controller:
To switch to parameter setting mode, press the down arrow key
[ ]
and then
[ESC]
. (If nothing happens, press
several times until the screen changes).
To stop the program and switch to the main menu of the Programming mode of operation,
proceed as follows:
1. Move cursor to „Stop“ (
①
) using the arrow
keys or
3. Move cursor to “yes” (
②
)
2. Confirm your selection: button
[OK]
Stop
Program
Wed. 00:00
ESC
Setup
2021-01-01
Network
Diagnostics
Stop program?
Yes
No
Stop
Program
Setup
Network
Diagnostics
Stop
Program
Setup
Netzwork
Diagnostics
①
①
②
SETTING TIME AND DATE
4. Confirm that LOGO! Move into the operating state STOP by pressing
[OK]
.
Afterwards LOGO! displays the main menu of the operation mode, where
you can switch to the time setting and adjust it using the arrow keys.
Msg Config
Start Screen
Clock
LCD
Menu Language
Factory Reset
NTP
Set Clock
S/W Time
②
3
Then restart the program.