2700-4001_22 IMA Manual
9
Last Revision: 12/14/2021
Figure 1.1: Do not carry IMA by connectors or cables.
The Tolomatic IMA Actuator weight range is approximately 3.0 to 42 kg ( 6.6 to 93 lb). Special care must be taken
when lifting this device. Do not carry by the connectors or cables. The connectors are not rated to support the
weight of the actuator.
Modifications to the Equipment
The manufacturer takes no responsibility whatsoever if the equipment is modified or if the equipment is used in any
way beyond performance specifications. Unauthorized modifications or changes to the equipment are strictly
forbidden, and void all warranties.
Repair and Maintenance
All power and supply media must be shut OFF before any work is performed on any equipment that is associated
with the Tolomatic IMA Actuator. The only field maintenance that may be performed on the Tolomatic IMA Actuator
is lubrication. All other repair or maintenance for the Tolomatic IMA Actuator must be performed at Tolomatic.
Requirement Regarding Personnel
All personnel must be completely informed regarding all safety regulations and the function of the equipment.
Risk Area and Personnel
When installed, pinch points are generated capable of high damaging forces. The risk area surrounding the
Tolomatic IMA Actuator must either be enclosed or clearly marked, including display signage in accordance with all
applicable national and international legal requirements. The risk area must be protected by a safety system that
stops the equipment if anyone enters the risk area. Personnel who enter the risk area must be authorized, trained
and qualified for the different tasks inside the risk area.
